Materials needed
You exact needs can vary but this is the MINIMAL you will need


Minimal Material Required to build a Rev.1 ramp

180'- 2" x 2" x .120 wall (1/8" thick)
120' -1" x 1" x .120 wall (1/8" thick)
Your choice of paint color for frame
Gray paint for wood
Sillica to mix into gray paint
3 sheets of 4' x 8' x 3/4" thick plywood

NOTE: If using wood, at least a 16" wide piece of 1/16" thick sheet metal will be required full length and centered to help support the wood. Failure to do this will result in the plywood falling apart in only a few hits.

NOTE: I STRONGLY ADVISE you to use:

3 sheets of 4' x 8' - 14 or 16 gauge Sheet Metal
3 sheets of 4' x 8' - " #9 Raised Expanded Metal

...instead of wood.


rampman [at] fmxramps.com

To reduce SPAM, replace the [at] with @ and remove the spaces before and after the [at] .